Product Description
Kubota M854K/KQ Tractor:
Reliable performance, flexible operation, comfortable and convenient
The compact 4-stroke 4-cylinder vertical water-cooled diesel engine offers large torque output and strong traction, as well as recombination power reserves for heavy duty operations
The use of durable sealed gear bridge can prevent the invasion and corrosion of mud and water, reduce maintenance links, and make maintenance more convenient. The LSD limited sliding front axle is not easy to slip on the muddy and bad road surface.
50 degrees large steering Angle design, faster turning speed, improve operating efficiency; Each 12-speed transmission, the main transmission synchronizer can be replaced with the main transmission synchronizer for smooth shifting without stopping; Independent, wet PTO clutch, hydraulic control mode, the user does not need to step on the main clutch, shift shuttle for the driver to switch back and forth.
Product Parameters
| Item No. |
M854K |
M854KQ |
| Engine Model |
V3800-DI-T-ES16 |
| Drive mode |
Four-wheel drive |
| Power Output Shaft Speed(r/min) |
540/720 |
| Hydraulic Output Valve |
Group 2/ Group 3 |
| Front Wheel Track Width(mm) |
1660/1760 mm |
| Rear Wheel Track Width(mm) |
1600/1720/1800/1920 mm |
| Gear |
12F+12R(2×6) |
| Maximum lift(KN) |
18 KN |
| Number of cylinders |
4 |
| Front wheel size(mm) |
12.4-24 mm |
| Rear wheel size(mm) |
18.4-30 mm |
| Total length(mm) |
4445 mm |
| Total width(mm) |
2215 mm |
| Total height(mm) |
2605 mm |
2680 mm |
| Minimum ground clearance(mm) |
485 mm |
| Total Weight(KG) |
3060 KG |
3290 KG |
Common accessories
Our Advantages
Reliable performance
1.Good power
Equipped with Kubota's vertical water-cooled 4-cylinder diesel engine, it achieves high torque output.
The use of 4 valve technology,4 cylinders 16 valves, with turbocharging device, so that the engine intake more fully exhaust more thoroughly.
2. Sealed bevel gear front axle
The use of sealed bevel gear front axle can prevent the invasion of mud and debris, not easy to leak oil, but also reduce the number of maintenance, longer service life.
3. Wet main clutch
The 85-95 horsepower segment is equipped with a wet multi-plate clutch, makes the tractor power engagement smoother and more stable quality.
4. Reliable speed change mechanism
The 70hp segment adopts the 4-gear transmission for main transmission and 2-gear transmission for secondary transmission, and the forward 8 gear + backward 8 gear transmission.
85-95 horsepower segment adopts 6-gear transmission, 2-gear transmission, 12-gear forward + 12-gear backward transmission.
5. Working organization
Rear power output :8 splines,540/720(RPM).
Hydraulic output valve: 1-3 sets of hydraulic output valves are available.
Flexible operation
1. 55 degrees large steering Angle
Kubota tractors have a 55-degree steering Angle, making turns faster, shortening operation time, reducing fuel consumption, and improving work efficiency. (Note M854-KS (G4) and M854-KQS (G4) have a maximum steering Angle of 50 degrees)
2. Shuttle commutation
Shuttle commutation allows the operator to easily switch forward and backward. Makes the tractor more advantageous when working in small fields, narrow sections or before using the loading machine.
The 70 HP segment is equipped with mechanical shuttle commutation, which can be quickly reversed by the hand through the operation of the main clutch.
The 85-95 HP segment is equipped with hydraulic shuttle reversing. By combining with the wet clutch, it is easier and smoother to complete the forward and backward reversing operation without using the main clutch while maintaining a reasonable speed and engine speed.
3. Synchronizer shift
The 70 HP section adopts the main speed 3 and 4 speed synchronous shift, and the 85 95 HP section adopts the main speed synchronous shift (enables the tractor to achieve gear shift without stopping completely).
4. Independent, wet PTO clutch
Hydraulic control mode, the right hand gently pull to complete the PTO clutch connection or separation, not easy to tire.
Electronic control assistance
1. Engine power assistance
Within the reasonable working load range, through the pre-setting, even if the working load fluctuates, the tractor will automatically adjust, so that the engine is stable at the pre-set speed.
It can help users stabilize the working effect, improve the overall working efficiency, and save fuel loss.
2. Engine speed memory
By pre-setting, two different engine speeds suitable for routine operations are stored, and the engine can quickly reach the required speed only by switching the AB two keys during operation.
It can help users to meet the requirements of engine speed under different working conditions and different tools.
Even novice operators can ensure the stability of the operation.
Detailed Photos
Best price will be quoted for you as soon as receive your Requirement !
Company Profile
Our company is located in the Linyi city, Shandong province. We have a wealth of experience in foreign trade, has many years of foreign trade history, and Asia, Africa, Latin America has a deep partnership. The company mainly engaged in various brands of second-hand excavator, tractors,graders, forklifts, rollers, dump trucks, cranes. Our company always believes that quality is more important than everything.
At present, we have established cooperative relations with many businesses at home and abroad.
Our products enter the domestic and foreign markets with high-tech content, well-known memory, performance docking, and value-added services. High-quality products and satisfactory service. All employees of our company wholeheartedly welcome customers to come to cooperate.
Packaging & Shipping
Packing: Wooden case or bare packing
1)Firm and safe package to protect the tractors avoiding damage;
2)Completed units package in containers.
For 1x20GP or 1x40GP.
FAQ
1. What can you buy from us?
Farm tractor; Used tractor; Walking tractor; Crawler tractor; Farm implements ; Farm equipment ; Spare parts.
2.How about delivery time?
Standard configuration products are always in stock.
The production period of Customizing products is 30 days.
3.Can we mix different models together?
Of course. We can offer different equipment and you can mix different products or models in a 20FT or 40FT container, but in order to make the most of the container space, usually we recommend checking the size of the machines.
4. What payment terms can we accept?
Normally 30% deposit is required in advance, 70% balance shall be settled before shipment.
5.What about after sales service?
Professional sales staff provide you with one-stop agricultural machinery and equipment service solutions.
Repair replacement and return guarantee are provided together with the tractor, so that you have no worries after purchase.
A complete after-sales service system provides services for global agents and relieves the worries of agents.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}